1 pair 3.0m Paddock Gates fitted on to 2.4m x 175 x 175mm Special Top Posts. Gates are handcrafted from Swedish Redwood pressure treated and fixings are stainless steel bolts.

1.2m Paddock Gate fixed onto wooden Larch Special Top Post 2.4m x 175mm x 175mm. Gates come standard height 1.2m to highest point.

Post & Rail Fence manufactured from 1.8m x 125mm x 125mm Larch Special top Posts and 4.8m 125mm x 41mm PAO Rails. All timber was pressure treated. Height to top rail approx. 1.050. Post centres are at 2.4m centres, and height to top of post is 1.2m, 600mm in the ground.

This Pergola was designed with 3.0m x 145mm x 145mm Posts, and 145 x 41mm Rafters at 400mm centres. Gallowboards were also fitted at 45 degrees on the corners. All timber was pressure treated and oiled by customer after being fitted.

Our New Storage Shed at Crowe’s Sawmills.  All our timber For Sale is now being stored under roof.  Call for our best prices on Dried Tanalised Timber.  Phone (071) 9631040

Alan and Eilish,

delivery received first thing this morning, thanks again for getting this organised and for the additional lengths. The timber looks great and we are looking forward to getting it installed.

Best regards,

Cathal

The above fence picture is the fence ordered & delivered to Cathal as seen on our website.

Hi Alan, “I have a neatly packaged fence inside my front wall as of this afternoon – thanks for the quick turnaround”.

Regards, Mark.

Mark ordered a morticed fence using Larch Posts & D.Fir Rails similar to picture above.

Ministerial visit to Crowe’s Sawmills Ltd, Mohill on Tuesday 7th November 2017.

This 2 Rail mortice fence using Larch Posthead Posts 1.8m x 150mm x 150mm and Rails 4.8m x 150mm x 41mm.  Pressure Treated and PAO.

1 pair of 1.5m Gates. Made from pressure treated Swedish redwood timber.

Made from pressure treated swedish redwood. These are a pair of 1.8m Gates x 1.2m high.

Timber Stable:  12m x 3.6m with overhang 1.8m. Height to wallplate 2.4m. Comprising of 3 no. 3.6m x 3.6m loose boxes and an open compartment 3.6 x 1.8m for hay/straw. Larch cladding 150 x 22, studwork 100 x 44, rafters 125 x 44, heavy duty stable doors, all plywood inside, gutters front and back. All pressure treated timber

Goosneck Picket Timber Gates

Hi Alan/Eilish,

                    I took delivery of the gates and other material yesterday pm. That was a very fast turnaround from time of placing order to delivery. I was just unpacking the delivery when you called me. Everything is there and we are delighted with the quality of the gates.

Thanks, Robert

This is a raised box for growing vegetables. Measuring 1.2m Long x .600 x .900 High.

Planter Box measuring approx. 1.1m x 1.1m x 1.0m High with solid floor. Made from pressure treated timber.

Double Doors 2.1m wide x 2.4m high made from Swedish redwood, galvanised fittings & stainless steel bolts. Ledged and braced with galvanised sheet fitted to rear of door.

Tackroom Door– 900 x 2.1m high, made from Swedish Redwood.

Single Stable Door-made from Swedish Redwood using galvanised hinges & fittings.

Closed Panel Fence using 2.4m x 125mm x 125mm Special Top Posts and 1.5m x 100mm x 22mm roundtop boards, backing rail 4.8m x 100mm x 44mm.

Morticed Post & Rail Fence using 1.8m x 150mm x 150mm Posthead Larch Posts and 4.8m x 125mm x 44mm Rails all PAO and pressure treated. Finished height of fence is approx. 1.2m to top of post, posts are at 2.4m centres.

This stable unit comprised of 2 x 3.6m x 3.6m loose boxes, 1 x 3.0m x 3.6m and 1 x 2.4m x 3.6m Tackroom with an overhang of 1.8m.  A storage shed measuring 14.4m long x 5.4m wide running at right angles to the stables. Stud work were 100 x 44 @ 400mm centres, rafters 125 x 44, cladding 150 x 22 Larch/Douglas Fir cladding. Heavy duty Stable Doors were fitted, with gutters black pvc. Felt was fixed on top of rafters with .60 steel corrigated sheeting slategrey. Build time approx. 5/6 weeks. This unit was built in February 2016.

Mortice Fence using 1.8m x 150mm x 150mm Posthead Posts and Rails 150mm x 44 pressure treated. Post centres are at 2.4m

1 Pair of 1.8m Paddock Gates pressure treated and fitted onto stone piers.

Special Top Picket Panel 1.8m wide x 1.5m high. Panels are made to fit into standard concrete “H” Post.  All timber plained and pressure treated.

Special top mortice fence using 4.8m x 150mm x 44mm Rails with 1.8m x 150mm x 150mm Posts. All timber pressure treated. Post centres 2.4m, height of fence approx. 1m to top rail.

Pedestrian Gate measuring 900mm in width x 1.6m high, made from Swedish Redwood using stainless steel bolts.

1 pair Leitrim Gates measuring 3.6m opening and height 1.6m high. Stainless steel bolts cuphead, galvanised hinges. Gates made from Swedish Redwood Timber.

Outdoor Picnic Bench and Table made from Larch/Douglas Fir timber, stainless steel bolts, clear stain. (Designed too be set into ground) 1.8m x 1.8m

Solid Larch Bench – Heavy Duty. Made from 150mm x 63mm Larch Timber stained with a clear Deck Oil.

1 Pair of 1.8m timber gates x 1.2m at the high point hinge side. Pressure Treated.  Customer sent us on these lovely pictures & this nice comment ”

Hi Alan, sorry it has taken me so long to get around to sending you pics of the gate.

We are over the moon with it, the design and quality are more than we imagined. People walking past every day make a comment about the beautiful gates. Hopefully, you are getting a few jobs in Lucan.

Thanks again

Timbers supplied and work in progress on new stables, customer happy with the work and looking forward to seeing the end product!

New Planter design –   1.0m x 1.0m x 900mm high.  Ideal for shrubs and small trees.

The gate in picture is a 1.2m Paddock Gate hung on a Special Top Post 150mm x 150mm. The fence is done with 2 Rails, using 1.8m x 125mm x 125mm Special Top Larch Posts and 2.4m x 95mm x 95mm Rails turned diagonally. Post centres are at 2.4m.  Our customer was very happy with the finished work & sent us this lovely comment “We are thrilled with our new fence“

Wooden Gates & Fencing supplied to Fencescape Ltd for the new cycle track on the old railway track between Mullingar and Athlone. This picture was taken at Castletowngeoghegan. Gate is 2.4m x 1.2m high in this photo.

Planter Boxes 1200 x 1200 x 700 High.  Made from Douglas Fir 150 x 35 pressure treated. Can be made any size. Drop in or give us a call & we will gladly give you a quotation.

Using 1.8m x 125mm x 125mm post head Larch posts and 125mm x 41mm rails. All timber planed and pressure treated. (This fence has being fitted since Spring 2015) In the first picture a gate is incorporated in fence.

1 pair of 1.8m Gates x 1.2m at the high point hinge side.  Pressure Treated.

Single Adair Gate  1.8m x 1.2m fitted on Gatepost with Galvanised Fittings.